- Contact Person : Ms. Xu Lisa
- Company Name : Shanghai Euchips Industrial Co., Ltd.
- Tel : 86-21-61210688
- Fax : 86-21-61210688-8017
- Address : Shanghai,Shanghai,3rd Floor, 6th Buliding, No.888, Shuangbai Road, Minhang District, Shanghai, 201108, China
- Country/Region : China
- Zip : 201108
Related Product Searches:700mA Dali dimming LED controller,High Quality,Dali dimming LED controller, led dimmer Dali signal,Dali-S1L700C-0
Features
DALI Digital control input, Dimming control LED moduleAddressing output channelSupport Touch DIM function, and can be dimmed manuallyDimming range is from 0-100% (LED Will start from 1% )Used for DC Power supplyOver-temperature protectionSecurity level : 2Single channel 700mA constant current outputThe number of lamps can be connected:3W X 3~12LED
Model DALI-S1L350C-0
Technical parameter: | ||||
Parameter | Min.* | Nom.* | Max. | Unit |
Input voltage range | 12 | 12-48 | 48 | Vdc |
Touch DIM AC input voltage frequency range | 45 | 50-60 | 65 | Hz |
Touch DIM AC input voltage range | 5 | - | 290 | VAC |
12-48 V DC power factor | 90 | 92 | - | |
Output current | 650 | 670 | 700 | mA/ ch |
Peak current | <800 | mA | ||
Output voltage | 9 | 9-40 | 40 | V |
Output power | 3 | 3-36 | 36 | W |
Dimming control DALI definition | IEC62386 IEC60929 | |||
Out casing temp | - | - | 70 | °C |
Surrounding temp | -20 | - | 50 | °C |
Protection Short circuit protection | ||||
Overload protection | ||||
Overheat protection |
*It’s available in 25°C indoor
Touch DIM function instructions:
1) Short press the Touch DIM switch (<0.5s) to control the lamp on or off
2) Long press the Touch DIM switch (>0.5s) to dim the brightness of light; The dimming direction will change every time after pressing switch
3) When the light being turned off, long press the Touch DIM switch can turn on the light and adjust it’s brightness according to the dimming direction
4) The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when do the adjustment with long pressing Touch DIM switch
5) Power off memory function, the power-down state before will be maintained when power on again
Product installation notes
1) Remark: DALI and TouchDIM functions cannot be used simultaneously, which can be controlled respectively by using DALI controllers or the equipments with TouchDIM function
2) Please read the connecting instruction picture before installation
3) Please use the complete set of product according to the provided specification
4) Please firstly pressure the cap end down in wire connecting process, then insert the thred of wire, and lastly check the wire is or not insert firmly
5) In order to avoid the damage of the equipment, please check the connecting method is correct or not before connecting the power
700mA Dali dimming LED controller