12W DALI LED Driver 350mA LED Dimmer

DALI LED Driver 1.Over temperature protection 2.Support Touch DIM function, and can be dimmed manually 3.CE

 

Product Features:  

 

DALI digital input control; dimming control LED modulesAddressable output channelSupport Touch DIM function, and can be dimmed manuallyDimming within 0-100% range (LED brightness will be started at 1%)For PC power supplyOverheat protectionSecurity class 2 1 channel 350MA constant current output

Model                                                                                 DALI-350-12

Technical Data:
Parameter	Min.*	Nom.*	Max.	Unit
Range of input voltage	100	120	240	Vac
Input frequency	47	50-60	63	Hz
120V AC input current	80	220	250	mA
120V AC power factor	0.5	0.6	0.7
Output power (1 channel power output,total)	1*3	1*12	1 x13	W
Output voltage	9	9-40	50	Vdc
Output current	300	320	350	mA
Summit current	-	<250	-	mA
Dimming control(DALI dimming)	IEC62386
Housing temperature			80	°C
Environment temperature	-25		55	°C
Protection        Short-circuit protection		OK
Overpower protection		OK
Overheat protection		OK

 

 

Touch DIM function instructions:

1)        Short press the Touch DIM switch (<0.5s) to control the lamp on or off

2)        Long press the Touch DIM switch (>0.5s) to dim the brightness of light; The dimming direction will change every time after pressing switch

3)        When the light being turned off, long press the Touch DIM switch can turn on the light and adjust it’s brightness according to the dimming direction

4)        The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when do the adjustment with long pressing Touch DIM switch

5)        Power off memory function, the power-down state before will be maintained when power on again

Product installation notes

1) Remark: DALI and TouchDIM functions cannot be used simultaneously, which can be controlled respectively by using DALI controllers or the equipments with TouchDIM function

2) Please read the connecting instruction picture before installation

3)    Please use the complete set of product according to the provided specification

4)    Please firstly pressure the cap end down in wire connecting process, then insert the thred of wire, and lastly check the wire is or not insert firmly

5)    In order to avoid the damage of the equipment, please check the connecting method is correct or not before connecting the power

12W DALI LED Driver 350mA LED Dimmer